Table of Contents
Overview
This article details how to gain access to maintenance mode on the Ingenico iPP3x0 RAM and RBA variants.
Need to Know
The two variants of the iPP3x0 (RAM & RBA) have different methods for accessing maintenance mode. If your device is intended for the UK/European market then you are likely using the RAM, whereas if your device is intended for the US Market, you are likely using the RBA. If you are still unsure as to which variant you have please check with your device distributor who will be able to confirm.
Accessing Maintenance Mode
iPP3x0 RAM
- Power on the device, or restart it by holding Yellow & Period (
Y
&.
) - Press MENU key
iPP3x0 RBA
- Power on the device, or restart it by holding Yellow & Hash - (
Y
&#
) - Wait until the grey information screen (see screenshot for example).
Information screen on the iPP350. The iPP320 is similar but less detailed.
- At the grey screen, press in sequence
2
,6
,3
,4
,Green/Enter
,F/Menu
Note: Once you have typed in 2
, 6
, 3
, 4
, Green/Enter
, you may have to press F/Menu
repeatedly until the menu appears.